xDrip+, AAPS & Spike - Installation & Setup

Send your CGM data straight from your phone to your Garmin watch with xDrip+ (Android), AAPS (Android) or Spike (iOS). No internet connection needed.

Quick Setup Guide

1

Install Companion App

  • • Install xDrip+ (Android)
  • • Or AAPS (Android)
  • • Or Spike (iOS)
2

Install Garmin App

  • • Open Connect IQ Store
  • • Search "CGM+ GB"
  • • Download & sync to watch
3

Enable Web Server

  • • Enable web server in your app
  • • Select your app in CGM+ GB
  • • Data syncs automatically

Total time: 5-10 minutes • No internet needed • Detailed steps below

Step 1: Install a Companion App on Your Phone

Install one of these companion apps on your phone:

xDrip+ (Android)

Popular open-source CGM app for Android

AAPS (Android)

AndroidAPS - Advanced diabetes management

Download:

Requires version 3.2.0.4 or newer

Spike (iOS)

CGM app for iPhone

Download:

Note: These apps are not in the app stores. Download them from the links above and follow each app's installation instructions carefully.

Step 2: Install CGM+ GB on Your Watch

  1. Open the Garmin Connect IQ Store on your phone or visit apps.garmin.com
  2. Search for "CGM+ GB"
  3. Tap Download or Install
  4. Wait for the app to sync to your watch (this can take a few minutes)

Note: Keep your watch connected to your phone via Bluetooth and the Garmin Connect app running during installation.

Step 3: Configure Your Companion App

Turn on the web server in your companion app, so your watch can get your CGM data locally.

A xDrip+ Setup

  1. Open xDrip+ on your phone
  2. Go to Settings → Inter-App Settings
  3. Enable "xDrip Web-Server"
  4. Important: Do NOT enable "Open Web Server". Keep it off.
  5. In the Garmin Connect IQ app, go to CGM+ GB settings
  6. Select "xDrip+" as your CGM System
  7. Save and sync to your watch

Test xDrip+ Connection

To check the setup, open this address in your phone's browser:

http://127.0.0.1:17580/sgv.json?count=12

If you see JSON data with timestamps and glucose values, xDrip+ is set up correctly.

B AAPS Setup

  1. Open AndroidAPS on your phone
  2. Go to Config Builder
  3. Enable the Garmin Plugin
  4. In the Garmin Connect IQ app, go to CGM+ GB settings
  5. Select "AAPS" as your CGM System
  6. Important: Leave the "Request Key" field blank
  7. Save and sync to your watch

Note: You need AAPS 3.2.0.4 or newer. With AAPS you also see loop status (IOB, TBR, COB) on your watchface.

Test AAPS Connection

To check the setup, open this address in your phone's browser:

http://127.0.0.1:28891/sgv.json?count=12&brief_mode=true

If you see JSON data, AAPS is set up correctly.

C Spike Setup

  1. Open Spike on your iPhone
  2. Go to Settings → Integration
  3. Enable "Internal HTTP Server"
  4. In the Garmin Connect IQ app, go to CGM+ GB settings
  5. Select "Spike" as your CGM System
  6. Save and sync to your watch

Note: With Spike you see IOB (Insulin on Board) and COB (Carbs on Board), but no basal rate.

Test Spike Connection

To check the setup, open this address in your phone's browser (Safari):

http://127.0.0.1:1979/sgv.json?count=2

If you see JSON data, Spike is set up correctly.

D Juggluco Setup

  1. Open Juggluco on your phone
  2. Open the Left menu → Settings → Exchange data → Web server
  3. Make sure the web server is turned on
  4. In the Garmin Connect IQ app, go to CGM+ GB settings
  5. Select "Juggluco" as your CGM System
  6. Save and sync to your watch

Note: No username or password is needed for Juggluco.

Troubleshooting

Common Issues

Data not updating on watch:

  • Check that the web server is on in your companion app
  • Check that your watch is connected to your phone via Bluetooth
  • Make sure the Garmin Connect app is running (in the background is fine)
  • Check that you picked the right CGM system in the CGM+ GB settings
  • Wait at least 5 minutes. Garmin limits updates to once every 5 minutes.

Error: -400 (Invalid HTTP Body):

  • The companion app and Garmin can't communicate
  • Check that the app you picked in the CGM+ GB settings matches your phone app
  • Restart your companion app (xDrip+/AAPS/Spike)
  • Restart the Garmin Connect app

Phone battery optimization killing apps:

  • Disable battery optimization for the Garmin Connect app
  • Disable battery optimization for your companion app (xDrip+/AAPS/Spike)
  • Don't restrict your phone's Bluetooth system apps either
  • See dontkillmyapp.com for steps for your phone

See the Error Codes page for more help and error details.

Next Step: Learn how to display CGM data on your watchface, or see Nightscout setup if you prefer syncing through the cloud.

⚠️ Important Disclaimer

  • NOT FOR MEDICAL DECISIONS: This app is for informational purposes only and should NOT be used to make medical decisions.
  • Always verify readings: Confirm glucose values with your official CGM receiver or app before taking action.
  • Emergency situations: In case of extreme glucose levels or medical emergencies, use your primary CGM device.
  • Delayed data: Readings may be delayed by several minutes due to how often the app can sync.
  • No liability: The developer assumes no responsibility for health outcomes related to the use of this app.
  • Not affiliated: This app is not approved by, endorsed by, or affiliated with Dexcom, Abbott (Libre), or any other medical device company.